1x6 Chosera 400 Grit Sharpening Stone for Jende JIGS, Edge Pro, Hapstone, TSProf

-- Excellent cleanup stone

-- Premium quality stone

-- Used for profiling, repairs and initial maintenance on your edges

-- Same as Naniwa Professional 400 Stone 

AvailabilityIn stock
SKU
852848005118
Rating:
100% of 100
Special Price $39.00 Regular Price $44.00

The 1x6 Naniwa Chosera 400 Grit stone is a premium level coarse stone used for profiling, repairs and initial maintenance on your edges. This stone also cleans up deeper factory scratches, makes transitioning from diamond plates, belts, and coarser stones easier and cleaner, and is a good foundation stone before progressing to finer grits.

The 1" x 6" x 5mm is mounted to a standard steel blank and is compatible with the Jende JIGS for Knives, Edge Pro, Hapstone and TSProf sharpeners. This stone is used with water only and works best when soaked in water for a minute or two before use. Let air dry and store dry when not in use. See our full range of 1x6 Naniwa Stones.

Abrasive Material: Aluminum Oxide

Ideal place in a sharpening progression:

-- Starting grit for factory edge knife and profiling.
-- Starting grit for light repair and maintenance of an already sharpened but dull edge.
-- After any diamond grit plate or coarser stone to remove the deeper scratches.
-- After lower grit sharpening stones (120, 220, 320 grit)
-- After coarse belt grinder grits (60, 80, 100, 120, 220, A65, A30 Trizact grit)
-- Before progressing to a finer and/or medium grit stone (600 - 2K grit) 

Hacks and Tips:

-- For a more aggressive stone, create a slurry by rubbing the stone’s surface with a smaller 400 Chosera stone, or a coarse or extra coarse diamond plate and some water. The slurry will be milky white.
-- Use a moderate amount of water when sharpening with this stone to avoid the black swarf from turning into a thick paste. A cleaner, more viscous surface will cut faster than a thicker pasted one.
-- Lap this stone with a coarse or extra coarse diamond plate, silicon carbide (SiC) powder, Jende Glass Lapping Plate, or low grit wet dry sand paper to keep it consistently flat and clean.

More Information
Description

The 1x6 Naniwa Chosera 400 Grit stone is a premium level coarse stone used for profiling, repairs and initial maintenance on your edges. This stone also cleans up deeper factory scratches, makes transitioning from diamond plates, belts, and coarser stones easier and cleaner, and is a good foundation stone before progressing to finer grits.

The 1" x 6" x 5mm is mounted to a standard steel blank and is compatible with the Jende JIGS for Knives, Edge Pro, Hapstone and TSProf sharpeners. This stone is used with water only and works best when soaked in water for a minute or two before use. Let air dry and store dry when not in use. See our full range of 1x6 Naniwa Stones.

Abrasive Material: Aluminum Oxide

Ideal place in a sharpening progression:

-- Starting grit for factory edge knife and profiling.
-- Starting grit for light repair and maintenance of an already sharpened but dull edge.
-- After any diamond grit plate or coarser stone to remove the deeper scratches.
-- After lower grit sharpening stones (120, 220, 320 grit)
-- After coarse belt grinder grits (60, 80, 100, 120, 220, A65, A30 Trizact grit)
-- Before progressing to a finer and/or medium grit stone (600 - 2K grit) 

Hacks and Tips:

-- For a more aggressive stone, create a slurry by rubbing the stone’s surface with a smaller 400 Chosera stone, or a coarse or extra coarse diamond plate and some water. The slurry will be milky white.
-- Use a moderate amount of water when sharpening with this stone to avoid the black swarf from turning into a thick paste. A cleaner, more viscous surface will cut faster than a thicker pasted one.
-- Lap this stone with a coarse or extra coarse diamond plate, silicon carbide (SiC) powder, Jende Glass Lapping Plate, or low grit wet dry sand paper to keep it consistently flat and clean.

Width1
Length6
Write Your Own Review
You're reviewing:1x6 Chosera 400 Grit Sharpening Stone for Jende JIGS, Edge Pro, Hapstone, TSProf
Your Rating

upsell products