1x4 Naniwa Chosera Stones for the KME Sharpener
The 1x4 Naniwa 1K Goken Pro stone is medium stone used for edge profiling, repairs, initial maintenance and for leaving one of the better 1K working sharp finishes out This stone also cleans up deeper factory scratches, makes transitioning from diamond plates and stones easier and cleaner, and is a good foundation stone before progressing to finer grits. One of the key features of this stone is that sets the stage to be followed by natural stone progressions or synthetic stone progressions.
This stone is 1" x 4" in size mounted to an aluminum blank with a total thickness of 5-6mm and used with water only. It works best when soaked in water for a minute or two before use. Let air dry and store dry when not in use.
Abrasive Material: Aluminum Oxide
Ideal place in a sharpening progression:
The Naniwa 1K Goken Pro sharpening stone is a mid-range sharpening stone that works on almost all types of knives, scissors, tools and chisels, including those made with abrasion resistant steels. While the 1x4 size is meant for use with the KME Sharpener, it is also a great size for a slip stone, field stone or a pocket stone for knife repairs and sharpening on the go.
This stone can also be used in a mix and match progression with other synthetic and natural sharpening stones as well as with other brands, such as Shapton, Sigma, Suehiro, Imanishi, Spyderco, King, etc. The Naniwa 1K Goken Pro is a Waterstone but can be used in conjunction with oil stones (such as Norton India and other carborundum and Arkansas stones) if the blade is wiped clean before and after switching stone types.
On More Traditional Carbon Steel and Stainless Steel Edges the Goken Pro works on steels between RC 52 and RC 65 on the Rockwell C Hardness scale. The stone is softer and quicker than other Naniwa stones, and will make a very respectable and consistent matte finish with an edge that can shave hairs on the softer end of the spectrum of steels like X50CrMoV15, AUS6, 440B, and most steels used by many kitchen knife makers like Henckels, Wüsthof, Gunter Wilhelm, F Dick, Victorinox, etc.
On the higher end of the hardness spectrum of traditional steel edges made with steels like 1095, 52100, 440C, Aogami White, Shirogami Blue, O1, W1, etc. The 1K Goken Pro really evens out the surface of these steels, leaving a beautiful matte finish and very functional working sharp edge. The softer matrix of the stone is ideal for these harder steels.
On Carbide Forming Steel and More Abrasion Resistant Steel Edges such as VG-10, D2, M2, S35V, S90V, etc. The 1K Goken Pro stone acts similarly to higher hardness carbon and stainless steels, prepping the surface to a matte finish with a work sharp edge.
Hacks and Tips:
Alternative Premium Level Stones: Jende 1K SF, Jende 1K SPK, Naniwa Chosera 1K, Sigma Select II 1K, Suehiro 1K Cerax
Alternative Economic Level Stones: King 1K, Sigma 1K Oribest, Suehiro 1K R