1×4 Suehiro Gokumyo Sharpening Stone 20K

The 1×4 Suehiro Gokumyo Sharpening Stone 20K is the highest grit in stone form from Suehiro, bringing out a hair popping edge and mirror, not to mention a smooth slicing edge that is superb for slicing fish or for straight razors. The main purpose of this sharpening stone is to polish, but it can also be used for light touching up of otherwise intact edges. It also is a stepping stone a leaping off point for further refinement through strops and emulsions. While the 1×4 size is meant for use with the KME Sharpener and the Wicked Edge Uni Stone Holder Paddles, it is also a great size for a slip stone, field stone or a pocket stone for knife sharpening on the go, or to remove unwanted final burrs.

The 1×4″ Suehiro Gokumyo 20K measures 1″ x4″ x 5mm in size and mounted on a blank. They are used with water only and work best when soaked in water for a minute or two before use. Store in a dry place in between use.

For 1×4 Suehiro 15K Gokumyo Sharpening Stone, Click this link.

Ideal place in a sharpening progression:

• Starting grit maintenance of an intact edge.
• After higher polishing grit sharpening stones (8K, 10K, 12K, 15K grit)
• Before progressing to further polishing stones and strops (30K+, 0.5 micron – 0.025 micron strops)
• A final stone for full mirror polished sharpness on many knives and tools.

This stone plays well with others:

The Suehiro Gokumyo 20K sharpening stone is a premium sharpening stone that works on almost all types of knives, scissors, tools and chisels, including those made with abrasion resistant steels. On tadeonal carbon and stainless steels, the 20K will polish the edge to a high mirror finish. On more abrasion resistant steels, the 20K is better as a finishing and polishing grit. It will reveal lower grit scratches that have not yet been worked out. It can also be used in a mix and match progression of other synthetic and natural sharpening stones, as well with other brands such as Chosera, Shapton, Sigma, Imanishi, Spyderco, etc. The Suehiros are Waterstones, and are not to be used with oil, but can be used in conjunction with oil stones (such as Norton India and other carborundum and Arkansas stones) if the blade is wiped clean before and after switching stone types.